Swelling Mechanism in Clay-Bearing Sandstones (2007-09)

Swelling clays in stone can generate damaging stresses during a wetting or a drying cycle, which leads to deterioration of building stones such as Portland Brownstone. There are two primary types of swelling identified for clays: short-range, ordered intracrystalline swelling, and long-range, continuous osmotic swelling.

Identification of the swelling mode is important for understanding and ultimately preventing swelling damage. Through comparison of XRD and swelling experiments with cationic pretreatments and organic solvents, we demonstrate that intracrystalline swelling is the primary mode of swelling present in three different stones, including Portland Brownstone.

The results highlight the importance of the counterbalancing cation to the swelling process, and a method for characterizing the intracrystalline swelling in sandstones is developed. Finally, the implications of long-term swelling behavior for stones are discussed.

Twitter It!

Related posts:

1. Manual for the Assessment of Load-Bearing Unreinforced Masonry Structures (2007-06) The assessment of unreinforced masonry structures is difficult to undertake...
2. Review of the Literature on the Topic of Acidic Deposition on Stone (1998-09) It is extremely difficult to determine how much of the...
3. Park Science: New Termite Baiting Technologies for the Preservation of Cultural Resources (2002-09) Termites are a significant structural pest in the United States,...
4. Stone Wall Repair Workshop: Ellsworth Rock Gardens (2007-08) The Ellsworth Rock Gardens were determined eligible for the National...
5. Research into Protective Coating Systems for Outdoor Bronze Sculpture and Ornamentation II (1999-23) This research addresses the continuing need for new coating strategies...